BILL OF MATERIALS for multiPIG+ version 1.6 PLL 04/25/04
------------------------------------------------------------
VALUE       QTY  IDENTIFICATION
------------------------------------------------------------
PLL PCB       1  2.5" x 3.8" Board

15pF          1  C5
56pF          2  C19,C22
1n            2  C17,C21
10n           3  C4,C6,C10
22n           1  C13
100n BLUE     9  C1,C2,C12,C15,C16,C18,C20,C23,Cx
100n WHITE    1  C7
1u BLUE       1  C9
22uF          5  C3,C8,C11,C14,C24
Brown/Orange  4  VCO 10-70 pF trim caps
Yellow Trim   6  VCO 7-50 pF trim caps

1N4148        2  D3,D6
MV209         5  D1,D2,D4,D5,D7
GREEN LED     1  DS1
RED LED       2  DS2,DS3

T37-6 16:4    1  L1
100uH/FT37-43 1  L3 inductor or toroid
FT37-61 20T   1  L2

J310          2  Q1,Q2

51            1  R1
120           1  R8
220           1  R26,R28,R29
1K            8  R6,R7,R14,R15,R17,R19,R22
1K2           1  R30
1K5           1  R31
2K2           2  ignore these parts (not used)
2K7           1  R16,R20
3K3           1  R21
3K9           1  R23
10K           9  R2,R3,R9,R10,R11,R12,R13,R18,R24
27k           1  R4
50K TEST POT  1  R27
150k          2  R5,R25

LM317L        2  U5,U6
LM358         1  U3
LMC662        1  U2
LT1252        1  U1
MC145151P2    1  U4

12.096  Xtal  1  X1; earlier kits used 10.24 xtal

10x2          1  2.5 mm header
5x1           4  2.5 mm header (cut to 3 pins)
Headers       4  housings with pins
VCO select    1  2.5 mm Jumper
10 meter      1  2.5 mm Jumper; used with 10.24 xtal only
Hex Switches  3  S1,S2,S3
wire          1  5 inches green 24 GA
wire          1  36 inches 27 GA

one set of 9 disc caps for the capacitor bank
33pF*2, 1 is extra, 56pF*2, 100pF, 130pF, 220pF*2, 330pF*2