|
|
Specs for the multiPIG+
GENERAL FEATURES
7 small PCBs (2.5" x 3.8")
160-10 meter ham band coverage including 60 meters
11.5 - 14 V operation
CW-only
Back-lit LCD with On/Off switch
PLL synthesized--low phase noise
Dual VFOs with RIT on one VFO control
RECEIVER
Low-noise, single-conversion superhet receiver
Double-balanced diode mixers for excellent dynamic range
Receive sensitivity: 0.15 uV (pre-amp on, typical.)
Narrow ham-band, tripple-tuned bandpass RX/TX filters
Smooth, fast attack, AF AGC (no "popping")
Selectable preamp
Variable-bandwidth I.F. crystal filtering
infinite tuning resolution
Optional AGC meter output
TRANSMITTER
Adjustable 0.1-5 Watts RF output on all bands
7 pole low-pass output filters
Harmonics and spurious outputs: Better than 45 dBc
Full PIN diode switched break-in
K10+ keyer; iambic A and B; adjustable weight
8-50 wpm (internal keyer); 70+ wpm (external keying)
Programmable message repeat interval
Both paddle and straight CW keying inputs
Variable bandwidth crystal filter (approx. 300 - 1000 Hz)
Adjustable RX CW offset with tracking TX side tone.
TUNE RANGES AND MAX POWER OUTPUT
(using 12.096 pll ref xtal)
| Freq Range | PLL | Test Freq | Watts |
| 1797- 1817 | B8B | 1810 | 13 |
| 3557- 3582 | 06A | 3560 | 12 |
| 5275- 5305 | C39 | 5300 | 12 |
| 7018- 7053 | 418 | 7040 | 12 |
| 10096-10141 | 906 | 10110 | 7 |
| 14011-14067 | 073 | 14060 | 7 |
| 18064-18103 | 547 | 19096 | 8 |
| 21018-21066 | F45 | 21060 | 9 |
| 24886-24945 | EB2 | 24906 | 5.5 |
| 28000-28068 | DA0 | 28060 | 7 |
|
|