Parts list for The Universal 1Watter - 20 Meter Version 3 04 Jan 2016 ========================================================= Items is Bag #1 C6,7,8,9,10,11,12,13,14,19,27,33,36,37,38,41,44,46,47,48,53 ...SMT capacitors and alternate 100nF mono green caps L4 FT37-43:10T - 9" #27 green T5 BN-43-2402-8T:2T - 10" #34 red & 4" #30 red ========================================================= Items in Bag #2 C1,4 220p disc *** C2 470p disc *** C3 empty C5 40pF Yellow or 50pF Brown Trimmer *** C15,21,22,34,35 - 100p mono or disc *** C16,29,30,31,32 - 470p mono or disc *** C17,39 47n yellow axial C18 3p small disc *** C20,28 22p NPO disc *** C23,24,26 - 50pF or 60pF Brown Trimmer *** C25 56p disc *** C40,52 10u C42,49 47u C43 33u C45 33p small disc C50 empty C51 empty Cs not included Cx not included D1,2 1N5711 blue (two pieces taped together) D3 1N5256B silver 30 V Zener D4,6,7 1N4148 red D5 MV209 varactor TO-92 case D8 1N5817 D9,10 NPC-127 blue 5.6 V Zener L1,2 T37-7 with 13 turns, 11" #26 red wire *** L3 FT37-61 with 12 turns, 10" #26 red wire *** L5 FT37-61 with 23 turns, 16" #30 red wire *** L6 FT37-61 with 12 turns, 10" #26 red wire *** Q1 2N5109 Q2 PN2222 Q3,6,7 2N3904 Q4 MPSH10 Q5 J310 Q8,9 J113 Q10 2N3906 Q11 2N7000 R1,2 51 R3,9,21,22,25 - 470 (R25 only used with no speed pot) R4 2K2 (2.2K) R5 500 ohm trim Pot (in hardware Bag #3) R6 100K R7,8,17,18,19 - 4K7 (4.7K) R10 1K R11 1K5 (1.5K) R12 1K2 (1.2K) R13,15 1M R14 4R7 (4.7) R16 10K R20 500 ohm volume control (in hardware Bag #3) R23,24 4M7 (4.7M) Rx not included T1 FT37-61 with 10 turns primary - 9" #26 red wire *** and 2 turns secondary - 4" #27 green wire T2 T37-7 with 20 turns primary - 14" #30 red wire *** and 1 turn secondary - 4" #27 green wire T3 T37-7 with 1 turn primary - 4" #27 green wire *** and 20 turns secondary - 14" #30 red wire T4 T37-7 with 4 turns primary - 6" #27 green wire *** and 28 turns secondary - 18" #30 red wire U1 78L10 U2,4,5 NE602A U6 LM386N-4 U3,7 78L08 U8 78L05 U9 ATtiny45-20PU Keyer IC Version 4 X1 8.064 kHz - custom China *** X2,3,4,5,6 - 6.000 - Mouser # 520-HCA600-32X *** ========================================================= Items in Bag #3 One Heat Sink for TO-5 5 each - 8 Pin Dip Machine Sockets 2 each - stereo phone jacks for headphones and keyer connections 1 each - normally open push-button 1 each - 500 ohm Volume Control - R20 1 each - 500 ohm trim pot - R6 1 each - BNC Connector ========================================================= Items in Bag #4 PCB Printed Circuit Board from www.expresspcb.com 51" #26 red solderable magnet wire (11t) 27" #27 green solderable magnet wire (6t) 66" #30 red solderable magnet wire (14t) 10" #34 red solderable magnet wire (2t) ========================================================= 1 each - Power Switch *NOT INCLUDED* 1 each - 10K or 20K or 50K or 100K Linear Single Turn Tune Potentiometer *NOT INCLUDED* 1 each - 10K or 20K or 50K or 100K Linear Keying Speed Potentiometer *NOT INCLUDED* Universal Interconnect Kit #2 *NOT INCLUDED* Connector Wire *NOT INCLUDED* Case *NOT INCLUDED* -See recommendations in the building instructions 4-40 PCB mounting screws and spacers *NOT INCLUDED* Instruction on How to Solder *NOT INCLUDED* ========================================================= *** = BAND SPECIFIC COMPONENT ===================== End of List =======================