KitsAndParts.Com Forum

W4GNS · 2008-11-24 21:21:48

I need 3 (are ever how many it is) PLL Hex switches for my MultiPig + anyone know where I can order these? I do not have my rig with me so no parts numbers handy. Or is there other options for the switches ? inquiring minds want to know.

W8DIZ · 2008-11-25 06:57:37

The hex switches are available from Mouser (don't have the part number) but I have some.

Here is a pix of the switches http://kitsandparts.com/PLL3DONE.jpg

Anybody else need some?

-Diz

W4GNS · 2008-11-25 10:08:56

Sounds great, I'll order some from you next time a place another order for future RF Tool Kit boards.....

W8DIZ wrote:
The hex switches are available from Mouser (don't have the part number) but I have some.

Here is a pix of the switches http://kitsandparts.com/PLL3DONE.jpg

Anybody else need some?

-Diz

W4GNS · 2008-12-07 22:26:14

Hey Diz
While digging through my "Junk Box" tonight, I found an unopened still in same white bag you packaged it in brand new Multipig+ PLL kit, you still have any of those kits (other boards) tucked away anywhere you wanna part with? or do I need to figure out what to do with this new found toy on another project ?

W8DIZ · 2008-12-09 07:11:03

W4GNS wrote:
Hey Diz
While digging through my "Junk Box" tonight, I found an unopened still in same white bag you packaged it in brand new Multipig+ PLL kit, you still have any of those kits (other boards) tucked away anywhere you wanna part with? or do I need to figure out what to do with this new found toy on another project ?

Hi Gary,

I don't have any more MP+ kitst...but I do have a use for the PLL Kit...wanna sell it to me?

-Diz

W4GNS · 2008-12-11 18:41:22

Guess I'll keep it and figger out how to use it with the RF Tool kits. Maybe the need for a PLL will inspire you to do another run of the MP+? Thats a suttle hint, Diz

W8DIZ wrote:
W4GNS wrote:
Hey Diz
While digging through my "Junk Box" tonight, I found an unopened still in same white bag you packaged it in brand new Multipig+ PLL kit, you still have any of those kits (other boards) tucked away anywhere you wanna part with? or do I need to figure out what to do with this new found toy on another project ?
Hi Gary,

I don't have any more MP+ kitst...but I do have a use for the PLL Kit...wanna sell it to me?

-Diz

wb8icn · 2008-12-17 08:52:59

Hey Diz,

any chance of the megaPIG Kit ever being revisited and kits offered?

Mikey

W8DIZ · 2008-12-17 15:36:44

wb8icn wrote:
Hey Diz,
any chance of the megaPIG Kit ever being revisited and kits offered?
Mikey

Only if I can come up with a very quiet DDS/VFO circuit
I'll explore the DDS early next year.

-Diz

merhar · 2012-06-17 14:10:19

Did you find a quiet DDS/VFO circuit?
It seems with the DDSVFO chips, only a low pass filter for the desired VFO frequencies would be needed.
I have a few 9850 DDS synthesizer chips (with 125 MHz osc) lying around to replace the analog VCO/PLL circuit-
What's next?
Tnx
Rich WE8T

W8DIZ wrote:
wb8icn wrote:
Hey Diz,
any chance of the megaPIG Kit ever being revisited and kits offered?
Mikey
Only if I can come up with a very quiet DDS/VFO circuit
I'll explore the DDS early next year.

-Diz

W8DIZ · 2012-06-18 07:48:05

Hello Rich,
I have put that project on hold until I have more time to dedicate to it.
Right now I have too many things happening and don't have the time to devote to the project.
To answer your question, I have not produced a "satisfactory" DDS yet, but looking at the AD9951
-Diz

KitsAndParts.Com Forum

#1 2008-11-24 21:21:48

MultiPig +

#2 2008-11-25 06:57:37

Re: MultiPig +

#3 2008-11-25 10:08:56

Re: MultiPig +

W8DIZ wrote:

#4 2008-12-07 22:26:14

Re: MultiPig +

#5 2008-12-09 07:11:03

Re: MultiPig +

W4GNS wrote:

#6 2008-12-11 18:41:22

Re: MultiPig +

W8DIZ wrote:

W4GNS wrote:

#7 2008-12-17 08:52:59

Re: MultiPig +

#8 2008-12-17 15:36:44

Re: MultiPig +

wb8icn wrote:

#9 2012-06-17 14:10:19

Re: MultiPig +

W8DIZ wrote:

wb8icn wrote:

#10 2012-06-18 07:48:05

Re: MultiPig +

Board footer